European Oak engineered flooring is the most popular timber flooring choice in Australia — and the price range reflects that demand. Across the market, you’ll find European Oak priced anywhere from $72/m² to well over $150/m². The variation comes down to board thickness, plank width, finish quality, timber grade, and laying pattern. Knowing where each dollar goes helps you compare quotes accurately and avoid overpaying.
At SKOV, our European Oak engineered timber flooring starts from $72/m² for wide plank and $79/m² for herringbone. We sell direct to homeowners and the trade — no retail markup, no middlemen. Below is our full 2026 price list, plus a breakdown of what drives flooring costs and what you should budget for installation.
SKOV European Oak Prices — Wide Plank
Our wide plank collection includes boards from 190mm to 220mm wide, available in 14mm, 15mm, and 20mm total thickness. All boards feature a European Oak wear layer, tongue-and-groove profile, and are finished with either UV lacquer or natural oil.
| Product | Thickness | Price (per m²) |
|---|---|---|
| Hera | 14mm | $72 |
| Metis | 14mm | $72 |
| Mani | 15mm / 20mm | $95–$115 |
| Freyja | 15mm / 20mm | $95–$115 |
| Sol | 15mm / 20mm | $95–$115 |
| Sif | 15mm / 20mm | $95–$115 |
| Tyr | 15mm / 20mm | $95–$115 |
| Idun | 15mm / 20mm | $95–$115 |
| Lif | 15mm / 20mm | $95–$115 |
| Runa | 15mm | $95 |
| Lord | 15mm | $95 |
| Agenda | 15mm | $95 |
SKOV European Oak Prices — Herringbone & Chevron
Herringbone flooring uses shorter boards (typically 600mm × 120mm) laid in a V-pattern. It requires more material and more installation time than straight-lay wide plank, which is reflected in the price. Chevron boards are cut at an angle to form a continuous zigzag and sit at a slight premium.
| Product | Thickness | Price (per m²) |
|---|---|---|
| Chateau HB | 14mm | $79 |
| Winston Hill HB | 14mm | $79 |
| Vintage Mocha HB | 14mm | $79 |
| Black Opal HB | 14mm | $88 |
| Rome HB | 14mm | $88 |
| Mani HB | 15mm | $95 |
| Freyja HB | 15mm | $95 |
| Sol HB | 15mm | $95 |
| Sif HB | 15mm | $95 |
| Tyr HB | 15mm | $95 |
| Idun HB | 15mm | $95 |
| Mani Chevron | 15mm | $104 |
What Affects European Oak Flooring Prices?
Five factors determine where a European Oak floor sits on the price spectrum. Understanding each one will help you compare quotes accurately and choose the right product for your budget.
1. Board thickness. A 14mm board with a 3mm wear layer is our entry-level option — solid performance for residential use and backed by the same 25-year structural warranty as our thicker boards. Step up to 15mm or 20mm and you get a thicker wear layer (4mm), which means more sanding and refinishing cycles over the floor’s lifetime. A 4mm wear layer supports two to five sand-and-recoat cycles, effectively doubling the floor’s useful life compared to a 2mm wear layer found in many budget imports. The 20mm boards also feel noticeably more substantial underfoot and are our recommendation for ground-floor living areas and homes with active kids or pets.
2. Plank width. Wider boards (220mm vs 190mm) use more timber per plank and require tighter quality control to stay flat. That adds cost, but the visual payoff in large, open rooms is significant — fewer joins, a cleaner sightline, and a sense of scale that narrow boards cannot replicate. For open-plan areas over 40m², the wider format is almost always the better choice.
3. Finish type. UV lacquer provides a sealed, low-maintenance surface ideal for rentals and high-traffic commercial spaces. Natural oil finishes (we use Woca oils from Denmark) penetrate the timber and give a richer, more tactile feel, but they need re-oiling every 12–24 months in heavy-use areas. The finish itself doesn’t dramatically change the board price, but the long-term maintenance cost differs. Oil finishes have one clear advantage: localised repairs. If you scratch an oiled board, you can treat just that section without refinishing the entire room.
4. Timber grade. European Oak grades range from Select & Better (minimal knots, uniform grain) through to Rustic (character knots, colour variation, filled splits). Higher grades cost more because more timber is rejected during sorting. Our full grading breakdown is in our grades of wood flooring guide.
5. Laying pattern. Herringbone and chevron patterns use shorter boards and require precision cutting and significantly more installation labour — a herringbone floor typically takes 50–70% longer to lay than a straight-lay wide plank floor of the same area. That’s why herringbone material starts at $79/m² compared to $72/m² for straight-lay, and installation costs run higher too. If you’re drawn to the herringbone look but watching the budget, our 14mm ${link(P.chateauHB, ‘Chateau Herringbone’)} at $79/m² is a strong starting point.
Installation Costs
The flooring material is only part of the budget. Installation method, subfloor condition, room layout, and access all affect the final number. Stairs, curved walls, and herringbone patterns add time and cost. Here are the typical ranges for professional installation in Sydney and Brisbane in 2026:
| Installation Method | Cost per m² | Best For |
|---|---|---|
| Floating (click-lock over underlay) | $25–$30 | Concrete slabs, apartments, DIY-friendly |
| Direct stick (glue-down) | $50–$70 | Maximum stability, underfloor heating, no movement |
Additional costs may include subfloor preparation ($10–$25/m² if levelling or moisture remediation is needed), removal of existing flooring, and scotia or skirting. For a full walkthrough of what’s involved, see our flooring installation guide.
Total Cost Example: 80m² Living Area
Here’s a realistic budget for a common scenario — an 80m² open-plan living and dining area in a Sydney home, using one of our most popular floors:
Product: Mani 15mm wide plank — $95/m²
Installation: Floating over concrete slab — $28/m²
Underlay: Included in installation quote
Combined rate: $123/m²
Area: 80m²
Total: 80 × $123 = $9,840 (supply + install)
If you opted for the entry-level Hera at $72/m² with the same floating installation, the total drops to around $8,000. At the other end, a direct-stick installation of Mani 20mm at $115/m² would come in closer to $14,000. The range gives you genuine flexibility depending on your priorities and budget.
How SKOV Pricing Compares
Most European Oak flooring in Australia passes through importers, distributors, and retail showrooms before reaching you. Each step adds margin — typically 20–30% per intermediary. By the time a board hits the shop floor, the retail price can be 40–60% above the landed cost. That’s why seemingly similar boards carry vastly different price tags across different retailers.
SKOV operates differently. We import directly from European mills, warehouse in Sydney and Brisbane, and sell to homeowners and the trade from our own Sydney and Brisbane showrooms. No distributors, no retail partners, no inflated pricing. That’s how we offer a 15mm, 4mm-wear-layer, oil-finished European Oak board at $95/m² — a price point that would typically buy you a thinner board with a lacquer finish elsewhere.
We also provide a 25-year structural warranty on all our engineered boards, and every product is available as a free sample so you can check the colour, grain, and finish in your own home before committing. For a deeper look at what makes European Oak the right choice and how it compares to other species, read our complete European Oak flooring guide.
Get Started
Order up to three free samples delivered to your door — no charge, no obligation. Each sample is a full-width offcut so you can judge the colour, grain, and texture under your own lighting. If you’d prefer to see the full range in person, visit our Sydney showroom or Brisbane showroom where our team can walk you through every product, discuss installation methods, and provide a detailed project quote tailored to your space.